Products Selector

Products Search

New Product

Automatic Doors FAQ

Products » Revolving Doors » TSA 325NT A Full Automatic Revolving Door

TSA 325NT A Full Automatic Revolving Door

General System Description

The fully-automatic door with movement detectors is suited for high access frequency. The automatic revolving door is activated via inside and outside movement detectors.


Structural dimensions:

Interior Dimension D mm (According to the site)
Exterior Dimension D + 80mm
Passage Height H mm (Max. 3000mm, higher by request)
Canopy Height min. 200 mm
Floor Recess (minimum) 70 mm (in case of using floor ring)



No. Of Leaves:

  • Three-leaf.
  • Four-leaf.

Door cross:

  • Rigid door leaves of screw less framing construction with extrude aluminium profiles to hold the flat toughened safety glass 10 mm, clear.


  • One door leaf of three-leaf revolving door can be tilted for ventilating purposes.Four-leaf.
  • Two door leaves of three-leaf revolving door can be tilted for Ventilating and escape 
  • Two or Three door leaves of four-leaf revolving door can be tilted for ventilating and        
    escape purposes.

 Side parts of screw less framing construction  of extruded aluminium

  profiles to hold:

  • Bent laminated VSG (laminated glass) 10 mm, clear
  • Bent, thermally insulated panel, 22 mm.
  • Smoothed, thermally insulated aluminium panel, 34 mm

Canopy construction:

  • Raised door crown with all-around crown cover made of bent aluminium sheet

Roof covering outside:

  • Waterproof, with 2 waterspout (flat roof without descent).
  • Dust-proof made plywood.
  • Optical sheet-metal cover

Roof covering inside:

  • Dust-proof made plywood.
  • Optical sheet-metal cover.


  • Segments made of aluminium, same finish like the whole system, incl. inspection opening.
  • Segments made of stainless-steel, grain 240, incl. inspection opening.
  • Incl. recess for customer provided air curtain

Surface of aluminium parts:

  • Anodized aluminium E6/EV1.
  • Colour anodized.
  • Steel-like anodic oxidation (polished appearance)
  • Stove-enamelled, RAL (Specified by the client)\
  • Steel covered, polished, grain 240
  • Covered with stainless-steel, polished,  #7


  • Side parts of bent VSG (laminated glass) 12 mm, clear.
  • Door leaf of flat ESG (toughened safety glass) 10 mm, clear.
  • Night-time sliding doors of bent VSG (laminated glass) 10 mm, clear 


  • Control board at the interior crown screen or external.
  • In the case of power cut-out, the door can be operated manually.


  • External control board (e.g. at the doorkeeper).
  • Drive as sub-floor drive, recess in the floor: 720 x 1430 x 280 mm, prepared for customer provided dewatering.


  • Manual bolt locking, prepared for profile half cylinder .
  • Electromechanical locking (bistable), crown at least 200 mm.

Floor ring (Optional):

  • Direct mounting of the self-supporting side part construction flush with the upper edge of the finished floor.
  • 360° special steel (V2A) floor ring of box profile 30x30x2 mm.Floor ring simultaneously serves as bordering of the floor covering. .

Floor covering (Optional):

  • Floor covering, provided by customer.
  • 18 mm coco mat in natural colours, only supply (laying by floorer).
  • 4 mm black rubber nap mat, only supply (laying by floorer)
  • Doormat Top Clean Trend, anthracite, 22 mm 


  • Polished, vertical pushrods of stainless steel, Ø 30 mm, directly mounting on glass.
  • Polished, horizontal pushrods of stainless steel, Ø 30 mm, directly mounting on glass.
  • Handles provided by customer.

Sliding doors with night-time locking, manual:

  • Fine-framed VSG (laminated glass) 10 mm, clear, with hook-bolt lock, profile cylinder.
  • Aluminium panels with hook-bolt lock, profile cylinder.
  • Outside running.
  • Inside running.


  • Automatic night locking sliding door, with battery pack for emergency opening in the case of 
    power cut-out .


  • Halogen spots (chromed), 20 watt, installed into the ceiling.
Gallery & Downloads