Products Selector

Products Search

Category
Keywords
New Product
 
 

Automatic Doors FAQ

Products » Full View Sectional Doors » Automatic Aluminum Full View Sectional Door

Automatic Aluminum Full View Sectional Door



1.
General System Description

 Automatic Aluminum Full View  Sectional Door.

2.
Technical Data
  • Door Sections: All rails and stiles will be extruded aluminum alloy 6063T6 with clear satin anodized finish. Sections will be 1 3/8" thick. Top and bottom rails and end stiles will be 3 1/2" wide, lower intermediate rail 1-13/16", upper intermediate rail 1- 1/16" and center stile 3" wide. Stiles and rails will be joined together with self tapping screws. Panels and glass to be sealed with butyl tape and held in place by a snap-in aluminum retainer. A flexible PVC vinyl U-shaped astragal is furnished standard.
  • Glazing: Sections will be glazed with 1/8" Tempered Glass.
  • Track: Standard Lift tracks with commercial quality 16 gauge. thickness, hot- dipped galvanized steel.
  • Hardware: All hinges and brackets are made from hot-dipped galvanized steel. Track rollers will be case hardened inner steel races with 10 ball rollers.
  • Counterbalance: Springs are torsion type, low stress, helical wound, oil-tempered spring wire. Spring fittings and drums will be made of die-cast, high strength aluminum. Pre-formed galvanized steel aircraft cable will provide a minimum of a 5:1 safety factor.
  • Weatherstripping: Exterior PVC Vinyl Seal on both jambs as well as head seal.
  • Operation by Trolley (Jackshaft) operator, 1/3, 1/2, 3/4 or 1 HP single phase (220 V. - 50 Hz.) or three phase (380 V. - 50 Hz.) complete with built-in control panel , push button and motor release for manual operation.
3.
Option
  • One pair of infra-red Safety Photocells.
Gallery & Downloads