Products Selector

Products Search

New Product

Automatic Doors FAQ

Products » Swinging Gates » Combi 740 Swinging Gate Operator

Combi 740 Swinging Gate Operator

General System Description

COMBI 740 is underground oil-hydraulic Swinging gate operator.

  • Pre –oiled and pre-set for immediate installation.
  • Close proximity of pump and jack gives fast response.
  • Close pivot point (145mm) to gate pier.
  • Manual release from inside and outside of property.
  • Available in two different versions for rotation leaves by  1100 & 1750
  • Suitable for gate width from 2 meter up to 3.5 m .
  • All in one pump and jack unit, contained in a single enclosure , is sunck into the ground at the foot of the left hand and right hand gate to achieve synchronised operation. The unit should be piped into a soak away to allow for water drainage.
  • Separte Control panel.

Safety Accessories:

  • (2) Pair of Photocell for Safety
  • Flashing Lamp to indicate the operation of the gate.
Technical Data

Electric Motor:

Power Output 1.18 KW (0.25HP)
Supply Voltage 230 V.
Frequency 50 Hz
Absorbed Current 1.2 A
Absorbed Power 250 W
Motor Rotation Speed 1,350 r.p.m

Double Stroke Jack & Hydraulic Pump:

Pump flow rate 0.851/min.
Rotation time -1100 23 second
Shaft Rotation Angle 1100 & 1750
Rated Torque 137.3Nm
Average Working Pressure 1 MPa (10 bar)
Max. Pump Pressure 3 MPa (30 bar)
Working Temperature  -200 C + 800 C
Weight of Hindi 880 complete Kit  27kg.
Cylinder bore 75 mm
Protection Standard IP 673
 Static Gate Weight 700 kg


Opening Time 23 Second
Closing Time 23 Second

Standard and Optional Accessories
  • Push Button from inside with three stations (open – stop - close).
  • Key Switch from outside.
  • Remote Control Unit.
  • Wireless Digital Key Pad
Gallery & Downloads