TRANZFORM® Fire

Designed to provide automaticing in the event of fire detection, TranZform Fire units are rated physical fire barriers that protect openings from the spread of fire and smoke. TranZform Fire units can be used in openings that are part of a required means of egress. TranZform Fire units are compliant with the Americans with Disabilities Act accessibility standards. STC 41. IBC® compliant per ICC-ES ESR 2300

Track:

Interconnected double rail heavy duty extruded aluminum or 14 gauge cold rolled steel track sections on 8” centers to support and retain the roller assemblies. Track is supplied with a white

baked-on powder coated finish standard, with mill finish aluminum a readily available option. Header support construction is not by Cornell.

Rollers:

Each lead post / stabilizer bar assembly shall be suspended by a 12 wheel ball bearing trolley system. Each individual panel is suspended using a steel hanger pin and ball bearing roller.

Header & Floor Sweeps:

Continuous, fire retardant flexible seals in flat black are attached to the top and bottom of the panels to eliminate gaps at the floor and head area for fire and smoke protection.

Panels:

Continuous length, 4 1/2” wide panels formed of 24 gauge commercial grade corrugated coated steel. Coating process includes a flexible urethane primer followed by a high performance, medium gloss, baked-on polyester coating in standard platinum gray color.

Floating Jamb:

18 gauge aluminized steel floating jamb assembly that travels within the storage pocket.

Hinges:

Continuous length, full height 24 gauge commercial grade coated metal hinges interconnect door panels. Material and finish to match panels. Allow for simple panel installation and replacement.

Lead Post:

24 gauge commercial grade coated steel member with material and finish to match panels. Lead sensing edge and full length interior tubing support provided standard. An internally mounted stabilizer bar support shall keep the lead posts vertical and in proper alignment during operation and ensure tight fitting closure of the door.

Wall Mounted Strike Post:

Recessed 18 gauge coated cold rolled steel member that receives the lead post and is secured to the wall opposite the stacked door. Finish to match panels.

Emergency Exit Hardware:

ADA compliant, clearly marked vertical exit bar provided as standard. Additional exit bars available on wide doors. Located on both sides.

Motor Operation:

Provided as standard for controlled automatic closing with emergency exit capability and ease of testing. DC 1/4 or 1/2 HP gear-motor, limit switch control system, drive sprocket and clutch. Operated by DC power supplied from two 12-volt maintenance free batteries located in the electronic control box. Batteries are continuously charged by the building’s electrical service and are automatically maintained at capacity.

• Single Slide or Bi-Parting construction
• Curved track + Non-sway construction
• Vision Panel + Pocket Doors
• Powder coat finish colors: consult factory