21 El-Khalifa EL-Maamoun St., Hiliopolis, Cairo, Egypt.
Tel : +202 2291 0192 / 2414 5881
Fax:202 2419 3800m
Counter Doors with Integral Frame & Countertop
Cornell’s Labeled and Non-labeled Package Units are factory-welded and fully assembled for a seamless, custom, built-in look. In addition to their pleasing aesthetics and durability, their single piece construction makes them fast and easy to install, saving time and money for contractors and building owners..
Mounting Options:
- Between jamb units (as seen in photos) have the coil mounted within the opening with minimal projection beyond the wall. A face of wall mounted coil option is available with non-fire rated units only.
- Slip-in units may be set into finished walls, eliminating the need to coordinate unit installation while constructing the wall. Trim is provided for the unfinished side of the unit.
- Built-in units wrap around and trim the wall on both sides when installed while the wall is being constructed.
Curtain:
Interlocking roll formed flat-faced 1 1/2” high slats with endlocks riveted to ends of alternate slats to maintain curtain alignment and prevent wear.
Standard Material & Finish: stainless steel with #4 finish, galvanized steel with exclusive GalvaNex™ finish in light gray or aluminum with clear or color anodized finish (non-fire rated only)
Endlocks/Windlocks:
Interlocking sections are fitted with high strength endlocks on alternate slats each secured with two ¼ inch (6.35 mm) rivets. Endlocks built to maintain slat alignment and to withstand 20 PSF windload.
Bottom Bar:
Reinforcing member attached to the bottom of the curtain. Equipped with vinyl astragal /eather seal to cushion the contact point on the counter. Includes locking mechanisms.
Standard Material & Finish: aluminum with clear or color anodized finish (non-fire rated only), stainless steel with #4 finish, or powder coated steel
Frames:
16 gauge integral welded steel head and jambs. Guide groove is incorporated into jamb design.
Standard Material & Finish: stainless steel with #4 finish or powder coated steel
Sills:
Integral sill is formed of 14 gauge 300 series stainless steel with #4 finish.
Optional Material & Finish: plastic laminate covered countertops, finish selected by customer
Counterbalance Shaft Assembly:
3” diameter outer shaft and 5/8” inner shaft. This assembly supports the curtain and contains counterbalance torsion springs for assisting operation.
Standard Material & Finish: steel
Brackets:
Reinforced steel plates that bolt to jamb assembly and support counterbalance shaft and curtain.
Standard Material & Finish: stainless steel with #4 finish or powder coated steel
Hood & Fascia:
16 gauge protective and aesthetic metal enclosure for the curtain that provides weather resistance at the head of the unit and keeps the brackets rigid.
Standard Material & Finish: stainless steel with #4 finish or powder coated steel
Operation:
Manual Push-Up: Provide lift handles on bottom bar and pole with hook.
Benefits:
- Fully assembled at the factory.
- Clean, custom appearance with no exposed edges.
- No field assembly makes for quick and easy installation.
- Slip-in units are ready to be set into existing walls, eliminating the need to coordinate installation during wall construction.
- Built-in units wrap around both sides of wall opening. Installation is done while wall is under construction.
- 14 gauge stainless steel sills are provided as standard.
- Units are built to exact opening size requirements.
